Extractor Handle Key Form 1, Bottom, Grey

20817-325

• Handle UL 94 V-0, bearing Zn die-cast
• At 6 U, the printed board location can be offset 1 HP to the right by swapping the upper and lower handles. This creates space for SMD components on the left hand side

Extractor Handle Key Form 1, Top, Grey

20817-326

• Handle UL 94 V-0, bearing Zn die-cast
• At 6 U, the printed board location can be offset 1 HP to the right by swapping the upper and lower handles. This creates space for SMD components on the left hand side

Extractor Handle Trapezoid Form, Type 1, Bottom, Black

20817-329

• Handle closed laterally, PPE, UL 94 V-1
• Pivot bush
• Identification plate, Al, 1.5 mm, anodized, cut edges plain
• Board support die-cast zinc
• In the 6U version, space can be created for SMD components on the left side by swapping the top and bottom handles and thus moving the PCB position 1 HP to the right

Extractor Handle Trapezoid Form, Type 1, Bottom, Grey

20817-327

• Handle closed laterally, PPE, UL 94 V-1Pivot bush
• Identification plate, Al, 1.5 mm, anodized, cut edges plain
• Board support die-cast zinc
• In the 6U version, space can be created for SMD components on the left side by swapping the top and bottom handles and thus moving the PCB position 1 HP to the right

Extractor Handle Trapezoid Form, Type 1, Top, Black

20817-330

Extractor Handle Trapezoid Form, Type 1, Top, Grey

20817-328

• Handle closed laterally, PPE, UL 94 V-1
• Pivot bush
• Identification plate, Al, 1.5 mm, anodized, cut edges plain
• Board support die-cast zinc
• In the 6U version, space can be created for SMD components on the left side by swapping the top and bottom handles and thus moving the PCB position 1 HP to the right

Extractor Handle Trapezoid Form, Type 2, RAL 9005, With Alignment Pin

20817-831

• Preassembled handle
• Extractor handle, PPE
• Identification plate, Al, 1.5 mm, anodized, cut edges plain
• Availalbe with / without guiding pin

Inserter/Extractor Handle Type IEL, Grey, Bottom, 10 Pieces

20817-620

• Suitable for insertion and extraction forces up to 700 N (per pair)
• In accordance with IEEE 1101.10 and IEC 60297-3-102
• A microswitch can be mounted

Inserter/Extractor Handle Type IEL, Grey, Top, 10 Pieces

20817-622

• Suitable for insertion and extraction forces up to 700 N (per pair)
• In accordance with IEEE 1101.10 and IEC 60297-3-102
• A microswitch can be mounted

PCB Handle B1, for Riveting

60817-072

• Extraction function only
• For bolting or riveting to PCBs
• Can be labeled

PCB Handle B1, for Screwing

60817-067

• Extraction function only
• For bolting or riveting to PCBs
• Can be labeled

PCB Handle, Can Be Bolted or Riveted, Yellow

60817-050

• PCB handle, can be bolted to the PCB
• For board thickness 1.6 mm

Plug-In Unit Kit With Extraction Handle Type 1, Unshielded, Grey, 6 U, 4 HP

20817-448

• Front panel, flat, unshielded
• Handle with extraction function

Plug-In Unit Kit With Trapezoid Handle, Shielded, Grey, 3 U, 6 HP

20848-666

• Front panel, U-profile, shielded
• Handle without extraction function

Static Handle Alu-Profile in Trapezoid Form, 4 HP

20809-282

• Aluminium profile handle

Static Handle Alu-Profile in Trapezoid Form, 5 HP

20809-283

• Aluminium profile handle

Static Handle Alu-Profile in Trapezoid Form, 6 HP

20809-284

• Aluminium profile handle

Static Handle Alu-Profile in Trapezoid Form, 8 HP

20809-286

• Aluminium profile handle

Static Handle Plastic in Trapezoid Form, Black, 10 HP

20808-085

• With separate identification plate, Al 1.5 mm
• Handle: PPE, UL 94 V-1

Static Handle Plastic in Trapezoid Form, Black, 12 HP

20808-086

• With separate identification plate, Al 1.5 mm
• Handle: PPE, UL 94 V-1

Static Handle Plastic in Trapezoid Form, Black, 14 HP

20808-087

• With separate identification plate, Al 1.5 mm
• Handle: PPE, UL 94 V-1

Static Handle Plastic in Trapezoid Form, Black, 3 HP

20809-396

• With separate identification plate, Al 1.5 mm
• Handle: PPE, UL 94 V-1

Static Handle Plastic in Trapezoid Form, Black, 4 HP

20809-397

• With separate identification plate, Al 1.5 mm
• Handle: PPE, UL 94 V-1

Static Handle Plastic in Trapezoid Form, Black, 5 HP

20808-080

• With separate identification plate, Al 1.5 mm
• Handle: PPE, UL 94 V-1

Static Handle Plastic in Trapezoid Form, Black, 7 HP

20808-082

• With separate identification plate, Al 1.5 mm
• Handle: PPE, UL 94 V-1

Static Handle Plastic in Trapezoid Form, Black, 8 HP

20808-083

• With separate identification plate, Al 1.5 mm
• Handle: PPE, UL 94 V-1

Static Handle Plastic in Trapezoid Form, Grey, 10 HP

20808-061

• With separate identification plate, Al 1.5 mm
• Handle: PPE, UL 94 V-1

Static Handle Plastic in Trapezoid Form, Grey, 12 HP

20808-062

• With separate identification plate, Al 1.5 mm
• Handle: PPE, UL 94 V-1

Static Handle Plastic in Trapezoid Form, Grey, 21 HP

20808-064

• With separate identification plate, Al 1.5 mm
• Handle: PPE, UL 94 V-1

Static Handle Plastic in Trapezoid Form, Grey, 28 HP

20808-065

Static Handle Plastic in Trapezoid Form, Grey, 3 HP

20809-294

• With separate identification plate, Al 1.5 mm
• Handle: PPE, UL 94 V-1

Static Handle Plastic in Trapezoid Form, Grey, 4 HP

20809-295

• With separate identification plate, Al 1.5 mm
• Handle: PPE, UL 94 V-1
• Product Type: Handle
• Works With: Front Panels
• Handle Type: Trapezoid, Static
• Type: Static
• Material: UL 94 V-1 Polyphenylene Ether
• Color: Grey
• Rack Width: 4 HP
• Width: 18.9 mm

Static Handle Plastic in Trapezoid Form, Grey, 40 HP

20808-066

• With separate identification plate, Al 1.5 mm
• Handle: PPE, UL 94 V-1

Static Handle Plastic in Trapezoid Form, Grey, 5 HP

20808-003

With separate identification plate, Al 1.5 mm

Handle: PPE, UL 94 V-1

Static Handle Plastic in Trapezoid Form, Grey, 6 HP

20808-004

• With separate identification plate, Al 1.5 mm
• Handle: PPE, UL 94 V-1

Static Handle Plastic in Trapezoid Form, Grey, 9 HP

20808-060

• With separate identification plate, Al 1.5 mm
• Handle: PPE, UL 94 V-1