For further enquiries, prices, samples and deliveries please contact our office on sales@4most.co.uk or +44 (0)1371 811171.
Plug-In Unit Front Panel for Static Trapezoid Handle, 3 U, 6 HP
30847-605
- Front panel, unshielded
- Front panel, Al, 2.5 mm, front anodized, conductive
Plug-In Unit Kit With Trapezoid Handle, Shielded, Grey, 3 U, 4 HP
20848-664
- Front panel, U-profile, shielded
- Handle without extraction function
Plug-In Unit U-Profile Front Panel for IEL, IET, Type 2 Handle 3 U, 4 HP
30848-312
- For IEL/IET/Trapeziform Type 2 handle
- Al extrusion, 2.5 mm, front anodized, rear conductive
- U-profile, shieldable with textile EMC gasket
- Front panel, 3 U, for front mounting
- Manufacturing process causes various surface structures to appear between 4 to 12 HP and 14 to 16 HP
- Stainless steel alignment pin pressed-in
Plug-In Unit U-Profile Front Panel for IEL, IET, Type 2 Handle, 6 U, 4 HP
30848-317
- Front panel, 6 UAl extrusion, 2.5 mm, front anodized, rear conductive
- U-profile, shieldable with textile EMC gasket
- For IEL/IET/Trapeziform Type 2 handle
- Manufacturing process causes various surface structures to appear between 4 to 12 HP and 14 to 16 HP
- For front mounting, PCB fixing with 0.1" offset
- For Rear I/O mounting
Plug-In Unit U-Profile Front Panel for IEL, IET, Type 2 Handle, 6 U, 5 HP
30848-304
- Front panel, 6 U
- Al extrusion, 2.5 mm, front anodized, rear conductive
- U-profile, shieldable with textile EMC gasket
- For IEL/IET/Trapeziform Type 2 handle
- Manufacturing process causes various surface structures to appear between 4 to 12 HP and 14 to 16 HP
- For front mounting, PCB fixing with 0.1" offset
- For Rear I/O mounting
Plug-In Unit U-Profile Front Panel for IEL, IET, Type 2 Handle, 6 U, 6 HP
30848-318
- Front panel, 6 U
- Al extrusion, 2.5 mm, front anodized, rear conductive
- U-profile, shieldable with textile EMC gasket
- For IEL/IET/Trapeziform Type 2 handle
- Manufacturing process causes various surface structures to appear between 4 to 12 HP and 14 to 16 HP
- For front mounting, PCB fixing with 0.1" offset
- For Rear I/O mounting