For further enquiries, prices, samples and deliveries please contact our office on sales@4most.co.uk or +44 (0)1371 811171.
Coding Block for Accessory Type Guide Rail, Bottom, Gray
34579-235
- The keying/coding block is slotted into the horizontal rail and positioned in front of a guide rail for accessories or the guide rail for heavy PCBs. In this keying/coding block the keying/coding peg can be used
- Coding is only possible in conjunction with IEEE handles
Coding Block for Accessory Type Guide Rail, Bottom, Red
34579-234
- The keying/coding block is slotted into the horizontal rail and positioned in front of a guide rail for accessories or the guide rail for heavy PCBs. In this keying/coding block the keying/coding peg can be used
- Coding is only possible in conjunction with IEEE handles
Coding Block for Accessory Type Guide Rail, Top, Gray
34579-233
- The keying/coding block is slotted into the horizontal rail and positioned in front of a guide rail for accessories or the guide rail for heavy PCBs. In this keying/coding block the keying/coding peg can be used
- Coding is only possible in conjunction with IEEE handles
Coding Block for Accessory Type Guide Rail, Top, Red
34579-232
- The keying/coding block is slotted into the horizontal rail and positioned in front of a guide rail for accessories or the guide rail for heavy PCBs. In this keying/coding block the keying/coding peg can be used
- Coding is only possible in conjunction with IEEE handles
Guide Rail Multi Piece, Mid-Piece, Aluminum Extrusion, 2 mm, 160 mm Board Length
34560-891
- Middle profile for mounting guide rails for 2 mm groove width
- 2 plastic end pieces are required; these are pushed on to both ends of the middle profile
- Guide rails can be clipped into horizontal rails (Al extrusion) or into 1.5 mm thick plates
- Storage temperature: from -40 °C ... 130 °C
Guide Rail Multi Piece, Mid-Piece, Aluminum Extrusion, 2 mm, 220 mm Board Length
34560-892
- Middle profile for mounting guide rails for 2 mm groove width
- 2 plastic end pieces are required; these are pushed on to both ends of the middle profile
- Guide rails can be clipped into horizontal rails (Al extrusion) or into 1.5 mm thick plates
- Storage temperature: from -40 °C ... 130 °C
Guide Rail Multi Piece, Mid-Piece, Aluminum Extrusion, 2 mm, 280 mm Board Length
34560-893
- Middle profile for mounting guide rails for 2 mm groove width
- 2 plastic end pieces are required; these are pushed on to both ends of the middle profile
- Guide rails can be clipped into horizontal rails (Al extrusion) or into 1.5 mm thick plates
- Storage temperature: from -40 °C ... 130 °C
Guide Rail Multi Piece, Mid-Piece, Anodized Aluminum Extrusion, 2 mm, 1000 mm
34560-900
- Middle profile for mounting guide rails for 2 mm groove width
- 2 plastic end pieces are required; these are pushed on to both ends of the middle profile
- Guide rails can be clipped into horizontal rails (Al extrusion) or into 1.5 mm thick plates
- Storage temperature: from -40 °C ... 130 °C
Guide Rail Multi Piece, Mid-Piece, Plastic Extrusion, 2 mm, 160 mm Board Length
34564-891
Middle profile for mounting guide rails for 2 mm groove width
2 plastic end pieces are required; these are pushed on to both ends of the middle profile
Guide rails can be clipped into horizontal rails (Al extrusion) or into 1.5 mm thick plates
Storage temperature: from -40 °C ... 130 °C