For further enquiries, prices, samples and deliveries please contact our office on sales@4most.co.uk or +44 (0)1371 811171.
Horizontal Rail, Rear, Center, Type ST, Standard, 63 HP
34561-063
- For indirect backplane mounting with insulation strip
- Aluminum extrusion, anodized surface, conductive contact surface, without HP markings
Horizontal Rail, Rear, Center, Type ST, Standard, 84 HP
34561-084
- For indirect backplane mounting with insulation strip
- Aluminum extrusion, anodized surface, conductive contact surface, without HP markings
Horizontal Rail, Rear, Center, Type VT, 84 HP
34561-184
- For direct backplane mounting
- Aluminum extrusion, anodized surface, conductive contact surface, without HP markings
Horizontal Rail, Rear, Type H-MZ, Heavy, With Z-Rail, 84 HP
34560-984
- For directly mounting connectors complying with EN 60603 (DIN 41612)
- With Z-rail for high mechanical load (H-MZ)
- Aluminum extrusion, anodized finish, conductive contact surface
Horizontal Rail, Rear, Type H-ST, Heavy, Standard, 63 HP
34560-563
- For indirect backplane mounting with insulation strip
- Standard where mechanical demands are high (H-ST)
- Mounting top and bottom
- < 28 HP not printed
- Aluminum extrusion, anodized finish, conductive contact surface, with HP markings
Horizontal Rail, Rear, Type H-ST, Heavy, Standard, 84 HP
34560-584
- For indirect backplane mounting with insulation strip
- Standard where mechanical demands are high (H-ST)
- Mounting top and bottom
- < 28 HP not printed
- Aluminum extrusion, anodized finish, conductive contact surface, with HP markings
Horizontal Rail, Rear, Type H-VT, Heavy, 42 HP
34560-742
- For direct backplane mounting
- Mounting top and bottom
- Recessed installation for high mechanical demands (H-VT)
- Aluminum extrusion, anodized finish, conductive contact surface
Horizontal Rail, Rear, Type H-VT, Heavy, 63 HP
34560-763
- For direct backplane mounting
- Mounting top and bottom
- Recessed installation for high mechanical demands (H-VT)
- Aluminum extrusion, anodized finish, conductive contact surface
Horizontal Rail, Rear, Type H-VT, Heavy, 84 HP
34560-784
- For direct backplane mounting
- Mounting top and bottom
- Recessed installation for high mechanical demands (H-VT)
- Aluminum extrusion, anodized finish, conductive contact surface
Horizontal Rail, Rear, Type L-MZ, Light, With Z-Rail, 84 HP
34560-884
- For directly mounting connectors complying with EN 60603 (DIN 41612)
- With Z-rail for low mechanical load (L-MZ)
- Aluminum extrusion, anodized finish, conductive contact surface
Horizontal Rail, Rear, Type L-ST, Light, Standard, 84 HP
34560-484
- For indirect backplane mounting with insulation strip
- Mounting top and bottom
- Aluminum extrusion, anodized finish, conductive contact surface
Horizontal Rails Threaded Insert, M2.5, 1000 mm
34565-196
- The collar screws used for fixing partial-width front panels must be 12.3 mm long
- Usable for all horizontal rails
Horizontal Rails Threaded Insert, M2.5, 20 HP
34561-320
- The collar screws used for fixing partial-width front panels must be 12.3 mm long
- Usable for all horizontal rails
Horizontal Rails Threaded Insert, M2.5, 28 HP
34561-328
- The collar screws used for fixing partial-width front panels must be 12.3 mm long
- Usable for all horizontal rails
Horizontal Rails Threaded Insert, M2.5, 42 HP
34561-342
- The collar screws used for fixing partial-width front panels must be 12.3 mm long
- Usable for all horizontal rails
Horizontal Rails Threaded Insert, M2.5, 63 HP
34561-363
- The collar screws used for fixing partial-width front panels must be 12.3 mm long
- Usable for all horizontal rails
Horizontal Rails Threaded Insert, M2.5, 84 HP
34561-384
- The collar screws used for fixing partial-width front panels must be 12.3 mm long
- Usable for all horizontal rails
Horizontal Rails Threaded Insert, M3
34561-484
- The collar screws used for fixing partial-width front panels must be 12.3 mm long
- Usable for all horizontal rails
Varistar 19'' Shelf, Stationary, 75 kg, RAL 7021, 600W 700D
21130-304
- Static load-carrying capacity 75 kg
- St, 1.5 mm
- Incl. GND/grounding
- Width 495 mm
- For mounting on four 19" panel/slide mounts
Z-Rail for Connector, EN 60603-2, 4 HP
30822-166
- Z-rails are bolted to the subrack for connector mounting (rear horizontal rail type ST, threaded insert inserted)
- For connectors to EN 60603‐2 (DIN 41612)
- Aluminum extrusion, anodized
Z-Rail for Connector, EN 60603-2, 42 HP
30822-047
- Z-rails are bolted to the subrack for connector mounting (rear horizontal rail type ST, threaded insert inserted)
- For connectors to EN 60603‐2 (DIN 41612)
- Aluminum extrusion, anodized
- Product Type: Z-Rail
- Product Family: EuropacPRO; RatiopacPRO; RatiopacPRO AIR; CompacPRO; PropacPRO
- Works With: Subracks; Cases
- Rack Width: 42 HP
- Length: 213.36 mm
- Package Quantity: 1
Z-Rail for Connector, EN 60603-2, 84 HP
30822-089
- Z-rails are bolted to the subrack for connector mounting (rear horizontal rail type ST, threaded insert inserted)
- For connectors to EN 60603‐2 (DIN 41612)
- Aluminum extrusion, anodized