A-SCREW-1-8

XLR chassis connector accessories

Black self tapping PLASTITE * screw 2.9 x 1.05 tri-rondular configuration, 8 mm long, panhead Suitable for A, AA and Combo Series

ACRF-*

XLR chassis connector accessories

Colour coding rings for 4 and 5 pole A and B series female receptacles

ACRM-*

XLR chassis connector accessories

Colour coding rings for 3 pole B serie, 4 and 5 pole A and B series male receptacles.

B-SCREW-1-8

XLR chassis connector accessories

Selftapping TAPTITE® screw M2.5 DIN 7500 for B-Series, panhead. 

CAS-DUMMY

XLR chassis connector accessories

The dummyPLUG case includes a mixed assortment of dummyPLUGs containing a practical number of each dummyPLUG packed in a handy portable case. The dummyPLUGs for chassis connectors enable you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally. 

DBA-BL

XLR chassis connector accessories

Dummy-plate to cover D-shape cutouts

DIE-R-HA-1

XLR chassis connector accessories

Die for Crimp XLR XX-HA. Suitable for tool HX-R-BNC.

DSS-*

XLR chassis connector accessories

Coloured lettering plate for D-shape-connectors.

FDR1

XLR chassis connector accessories

Round panel flange for NC3FDX-EMC-SPEC

HA-3FXX

XLR chassis connector accessories

Replacement crimp contact for the NC3FXX-HA cable connector and the NC3FD-LX-HA receptacle 

HA-3MXX

XLR chassis connector accessories

Replacement crimp contact for the NC3MXX-HA cable connector and the NC3MD-LX-HA receptacle

HTX

XLR chassis connector accessories

Hand tool for tightening the bushing of the XLR X, XX series and etherCON NE8MX series

HX-R-BNC

XLR chassis connector accessories

Crimp tool, frame

MFD

XLR chassis connector accessories

The fixing plate with M3 thread offers efficient and ease mounting of all D-sized chassis connectors by M3 screws.

NDF

XLR chassis connector accessories

The dummyPLUG NDF for Neutrik female XLR receptacles enable you to simplify cabling. Unused in- and outputs can be covered to avoid miss wiring and protect against dust additionally

NDM

XLR chassis connector accessories

The dummyPLUG NDM for Neutrik male XLR receptacles enables you to simplify cabling. Unused in- and outputs can be covered to avoid miss wiring and protect against dust additionally

NZP1RU-12

XLR chassis connector accessories

The angled 19" panel for racks in demanding environments protects the installed receptacles well against the ingress of dirt and water. The panel is 30° forward-turned and offers 12 D- shape cutouts with M3 threaded fastening holes. 

SCCD-W

XLR chassis connector accessories

The spring-loaded cover SCCD-W shuts automatically after unplugging the cable connector and seals the chassis connectors against dust and water to IP65. The transparent cover allows you to see the protected chassis connector all the time. 

SCD-W

XLR chassis connector accessories

The rubber sealing cover protects D-Type chassis connectors from dust and water according to protection class IP65.

SCDF

XLR chassis connector accessories

Rubber sealing covers for the XLR D-Series female chassis connectors to protect the connectors against dust and moisture.

SCDM

XLR chassis connector accessories

Rubber sealing cover for the XLR D-Series male chassis connectors and for the speakON chassis connectors (NL2M* and NL4M*) to protect the connectors against dust and moisture.

SCDP-*

XLR chassis connector accessories

The SCDP-* sealing gasket provides a dust and water resistant assembly for all D-shape chassis connectors to front panels.

SCDR

XLR chassis connector accessories

Soft plastic cover for the rear ends of several D-size chassis connectors. It is used to protect the gap between connector and cable. The protection cover works with all common wires and cables – you simply cut off the cover end to the preferred diameter. 

SCDX

XLR chassis connector accessories

This hinged cover seals D-size chassis connectors from water, dust and dirt in unmated condition according to IP42. It is available in different colours. 

SCF

XLR chassis connector accessories

The handy dust protection cover for female chassis connectors can be used, when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when not in use.

Suitable for:

XLR D Series female

XLR A & B Series female

etherCON A&B Series

etherCON D Series

etherCON CAT6 Chassis Connectors

BNC D Series

Phono (RCA) Chassis Connectors

SCFDX-TOP

XLR chassis connector accessories

• Uses high impact UV-resistant materials 
• Outdoor protection according to 

SCM

XLR chassis connector accessories

The handy dust protection cover for male chassis connectors can be used, when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when not in use.

Suitable for:

XLR D Series male

XLR A & B Series male

SCMDX-TOP

XLR chassis connector accessories

• Uses high impact UV-resistant materials 
• Outdoor protection according to IP65

SFAV

XLR chassis connector accessories

Rubber frame to mount between the front plate and the rear verticale print, for airtight vertical XLR A and B Series chassis connectors