Coronavirus update: Business as usual


For further enquiries, prices, samples and deliveries please contact our office on sales@4most.co.uk or +44 (0)1371 811171.

CAS-DUMMY

CAS-DUMMY

Dummy plug case

The dummyPLUG case includes a mixed assortment of dummyPLUGs containing a practical number of each dummyPLUG packed in a handy portable case. The dummyPLUGs for chassis connectors enable you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally. 

HTAC

HTAC

Hand tool for tightening powercon True1 bushing

Hand tool for tightening the bushing of the powerCON TRUE1.

HTFAC

HTFAC

Hand tool for tightening speakOn bushing

Hand tool for tightening the bushing of the speakON NL4FC and the powerCON 20A cable connectors. 

MFD

MFD

M3 mounting frame

The fixing plate with M3 thread offers efficient and ease mounting of all D-sized chassis connectors by M3 screws

NAC3MM-1

NAC3MM-1

Coupler for linking cable

powerCON NAC3MPA-1 (power in) - powerCON NAC3MPB-1 (power out), coupler for linking cables

NDL

NDL

Dummy Plug

The dummyPLUG NDL for all 4 pole Neutrik speakON and powerCON chassis enables you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally.

NLFASTON

NLFASTON

Faston Receptacle

Faston receptacle for tabs with 'positive lock', Tab Fit 4.75 x 0.51 mm (0.187 x 0.02 in), Equivalent to AMP

SCCD-W

SCCD-W

Spring-loaded sealing cover

The spring-loaded cover SCCD-W shuts automatically after unplugging the cable connector and seals the chassis connectors against dust and water to IP65. The transparent cover allows you to see the protected chassis connector all the time. 

SCD-W

SCD-W

Universal Sealing Cap

The rubber sealing cover protects D-Type chassis connectors from dust and water according to protection class IP65.

SCDP

SCDP

Sealing gasket

The SCDP-* sealing gasket provides a dust and water resistant assembly for all D-shape chassis connectors to front panels.

SCDR

SCDR

Soft plastic cover

Soft plastic cover for the rear ends of several D-size chassis connectors. It is used to protect the gap between connector and cable. The protection cover works with all common wires and cables – you simply cut off the cover end to the preferred diameter. 

SCDX

SCDX

Hinged cover

This hinged cover seals D-size chassis connectors from water, dust and dirt in unmated condition according to IP42. It is available in different colors.

SCL

SCL

Dust protection cover

Dust protection cover for most speakON and powerCON chassis connectors. It can be used, when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when not in use.

SCNAC-FPX

SCNAC-FPX

Sealing cover for powerCon True1 NAC3FPX

The rubber sealing cover protects the powerCON TRUE1 female chassis connector NAC3FPX* from dust and water according to protection class IP65.

SCNAC-MPX

SCNAC-MPX

Sealing cover for powerCon True1 NAC3MPX

The rubber sealing cover protects the powerCON TRUE1 male chassis connector NAC3MPX from dust and water according to protection class IP65. 

SCNAC-PX

SCNAC-PX

Sealing cover for powerCon True1 NAC3PX

The rubber sealing cover protects the powerCON TRUE1 duplex chassis connector NAC3PX from dust and water according to protection class IP65.