Business As Usual For Our Customers... Click here for more information.


For further enquiries, prices, samples and deliveries please contact our office on sales@4most.co.uk or +44 (0)1371 811171.

CAS-DUMMY

CAS-DUMMY

Dummy plug case

The dummyPLUG case includes a mixed assortment of dummyPLUGs containing a practical number of each dummyPLUG packed in a handy portable case. The dummyPLUGs for chassis connectors enable you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally. 

Field Assembly opticalCON Connector

Field Assembly opticalCON Connector

Field assembly kit

Some situations require a connector assembly on-site. Typical examples are peer-to-peer installations, field installations or repair.Neutrik offers a suitable solution for these requirements – the Neutrik opticalCON field assembly kit.

This kit is based on Corning UniCam pre-polished LC connectors and allows field assembly of Neutrik opticalCON cable connectors. It is a simplified installation without needing a lot of expensive equipment. The opticalCON Field Assembly kit offers a fusion splice option as well. This brings optimized assembly time, unsurpassed LC performance and no need for field polishing.

Due to the unique connector construction the assembly procedure doesn't require further expensive tooling in addition to the fusion splice device cost (suitable for fusion splicer FITEL S123C, S153A, S178A). FITEL fusion splice equipment is most commonly used and can be ordered from FITEL distribution.

FOCD-STD

FOCD-STD

  • Enhanced inspection and cleaning procedure
  • Lockable with opticalCON DUO cable connector
  • Compatible with conventional cleaning and inspection equipment

FOPS-SINGLE

FOPS-SINGLE

  • The pulling sock which is available as single and split version simplifies the installation at a pulling force > 100 kg.
  • The ADVANCED pulling solution offers an optimal protection for the cable connectors in harsh environment.

FOPS-SPLIT

FOPS-SPLIT

  • The pulling sock which is available as single and split version simplifies the installation at a pulling force > 100 kg.
  • The ADVANCED pulling solution offers an optimal protection for the cable connectors in harsh environment.

NAO2*-H1W-A

NAO2*-H1W-A

Weatherproof opticalCON DUO coupler

  • LC-Duplex for cable extensions with 4 copper wires (0.75 mm²).

NDO

NDO

The dummyPLUG NDO for Neutrik opticalCON receptacles enables you

  • Unused inputs can be covered to avoid miss wiring and protect against dust additionally.

NO2-4FDW-1-A

NO2-4FDW-1-A

Chassis connector with black chromium plating

  • Suggested OEM equipment connector due to LC front compatibility
  • Designed as feedthrough with automatic sealing shutter
  • Shutter with silicone gasket protects optical connection from dust and dirt
  • Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage
  • Accommodates standard LC connectors on the rear for simple installation
  • Connection on the front side either by rugged opticalCON or standard LC connector
  • The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations
  • IP65 ingress protection in mated condition with SCDP-*
  • Color coding with SCDP-* according to ANSI/TIA-568.3-D

                Standard:

                    Multimode - black

                    Single mode PC - blue

                    Single mode APC - green

NO2-4FDW-A

NO2-4FDW-A

Chassis connector with black chromium plating

  • Suggested OEM equipment connector due to LC front compatibility
  • Designed as feedthrough with automatic sealing shutter
  • Shutter with silicone gasket protects optical connection from dust and dirt
  • Accommodates standard LC connectors on the rear for simple installation
  • Connection on the front side either by rugged opticalCON or standard LC connector
  • The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations
  • IP65 ingress protection in mated condition with SCDP-*
  • Color coding with SCDP-* according to ANSI/TIA-568.3-D Standard:
        Multimode - black
        Single mode PC - blue
        Single mode APC - green
  •  Improved contacts to allow indoor camera routing applications (pollution degree 1, overvoltage category 1) acc. to IEC 60664 up to 240 V ac.

NOR-*

NOR-*

Color coding ring

For opticalCON cable and chassis connectors (SCNO-FDW-A)

Available colors:
NOR-0 – black
NOR-1 – brown
NOR-2 – red
NOR-3 – orange
NOR-4 – yellow
NOR-5 – green
NOR-6 – blue
NOR-7 – violet
NOR-8 – grey
NOR-9 – white

 

NZP1RU-12

NZP1RU-12

XLR chassis connector accessories

The angled 19" panel for racks in demanding environments protects the installed receptacles well against the ingress of dirt and water. The panel is 30° forward-turned and offers 12 D- shape cutouts with M3 threaded fastening holes. 

NZP1RU-8

NZP1RU-8

The angled 19" panel for racks in demanding environments

  • The panel is 30° forward-turned and offers 8 D-shape cut outs with M3 threaded fastening holes.

opticalCON DUO

opticalCON DUO

Assembled 2 fibers rugged and lightweight mobile field cable

  • Ruggedized and dirt protected fiber optic connection system
  • Waterproof acc. to IP65 safety standard in mated condition
  • 2-pole military approved robust and light weight mobile field cable with multi- or single mode fibers opticalCON multimode fiber cables offer laser and bend optimized OM3 fibers
  • Accommodates standard optical LC-Duplex connectors
  • Cable connector features rugged all metal housing and heavy duty cable retention
  • Excellent dust and dirt protection due to automatic sealing shutter with silicone gasket
  • Reliable Push-Pull locking mechanism
  • Easy to clean, no special tools required
  • Available in different packaging versions

opticalCON DUO ARMORED

opticalCON DUO ARMORED

opticalCON ARMORED cable

  • opticalCON ARMORED cable for demanding applications like touring / rental or outdoor broadcast
  • opticalCON multi mode fiber cables offer laser and bend optimized OM3 fibers
  • Offers a cut-proof and rodent-resistant double-jacket, glass-yarn armored cable construction
  • Rugged 2-channel fiber optic connection system
  • For Point-to-Point multichannel routing
  • Innovative spherical shutter guarantees low maintenance
  • Dust and water resistant according to IP65 in mated condition
  • Limited 100 m

opticalCON DUO HYBRID

opticalCON DUO HYBRID

Assembled extra rugged hybrid cable

  • Ruggedized and dirt protected fiber optic connection system
  • Waterproof acc. to IP65 safety standard in mated condition
  • Extra robust hybrid cable with 2 multimode fibers and 4 x 0.75 mm² copper wires opticalCON multimode fiber cables offer laser and bend optimized OM3 fibers
  • Accommodates standard optical LC-Duplex connectors
  • Cable connector features rugged all metal housing and heavy duty cable retention
  • Excellent dust and dirt protection due to automatic sealing shutter with silicone gasket
  • Reliable Push-Pull locking mechanism
  • Easy to clean, no special tools required
  • Available in different packaging versions

opticalCON DUO LOW VOLTAGE HYBRID

opticalCON DUO LOW VOLTAGE HYBRID

Cost effective fiber optic hybrid cable solution

  • Eliminates need for awkward and costly SMPTE cables if only ELV2 (< 50 V ac) is required
  • Ruggedized and dirt protected fiber optic connection system
  • Waterproof acc. to IP65 safety standard in mated condition
  • Ultra-flexible, lightweight and cost effective fiber optic hybrid camera cable solution
  • Small drum up to 150 m cable (15 kg)
  • Accommodates standard optical LC-Duplex connectors
  • Cable connector features rugged all metal housing and heavy duty cable retention
  • Excellent dust and dirt protection due to automatic sealing shutter with silicone gasket
  • Reliable Push-Pull locking mechanism
  • Easy to clean, no special tools required
  • Available in different packaging versions

opticalCON DUO SMPTE

opticalCON DUO SMPTE

Pre-assembled SMPTE cable

  • Ruggedized and dirt protected fiber optic connection system
  • Waterproof acc. to IP65 safety standard in mated condition
  • Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage.
  • Suitable for outdoor applications < 50Vac (ELV)
  • Accommodates standard optical LC-Duplex connectors
  • Cable connector features rugged all metal housing and heavy duty cable retention
  • Excellent dust and dirt protection due to automatic sealing shutter with silicone gasket
  • Reliable Push-Pull locking mechanism
  • Easy to clean, no special tools required
  • Available in different packaging versions

opticalCON DUO X-TREME

opticalCON DUO X-TREME

Assembled, 2 channel X-TREME cable

  • opticalCON X-TREME cable for demanding applications like touring / rental or outdoor broadcast
  • opticalCON multimode fiber cables offer laser and bend optimized OM3 fibers
  • Offering a cut-proof and rodent resistant double jacket glass yarn armored cable construction
  • Rugged and dirt protected 2 channel fiber optic connection system
  • Excellent dust and dirt protection due to automatic sealing shutter with silicone gasket
  • Accommodates standard optical LC-Duplex connectors
  • Reliable Push-Pull locking mechanism
  • Dust and water resistant according to IP65 in mated condition
  • Easy to clean, no special tools required
  • Available in different packaging versions

 

SCCD-W

SCCD-W

Spring-loaded sealing cover

The spring-loaded cover SCCD-W shuts automatically after unplugging the cable connector and seals the chassis connectors against dust and water to IP65. The transparent cover allows you to see the protected chassis connector all the time. 

SCD-NC

SCD-NC

Rugged rubber sealing cover for opticalCON chassis connectors

Fiber applications as drop down or stage boxes and certain outdoor devices require an additional protection of theopticalCON chassis connectors. The sealing dust cover encloses the entire shutter group and completely protects the interior from pollutant and ingress of water. It can be mated with thecable connector cover to keep the interior clean.

SCDP-*

SCDP-*

XLR chassis connector accessories

The SCDP-* sealing gasket provides a dust and water resistant assembly for all D-shape chassis connectors to front panels.

SCDR

SCDR

Soft plastic cover

Soft plastic cover for the rear ends of several D-size chassis connectors. It is used to protect the gap between connector and cable. The protection cover works with all common wires and cables – you simply cut off the cover end to the preferred diameter. 

SCDX

SCDX

Hinged cover

This hinged cover seals D-size chassis connectors from water, dust and dirt in unmated condition according to IP42. It is available in different colors.

SCNKO

SCNKO

  • Dirt protection for opticalCON DUO cable connector (spare part)

SCNO*X-A

SCNO*X-A

Rubber coated pollutant-protection cover for opticalCON cable co

Due to the innovative design, the ergonomic rubber boot can be safely locked with the spring loaded push/pull mechanism of the cable connector front and protects the fiber ferrules of any contamination especially during spooling of cables. It can be mated with the chassis cover to keep the interior clean.

SCNO*X-A-NC

SCNO*X-A-NC

Noise cancelling rubber protection cover for opticalCON cable co

Due to the innovative design, the ergonomic rubber boot can be safely locked with the spring loaded push/pull mechanism of the cable connector front and protects the fiber ferrules of any contamination especially during spooling of cables.

  • SCNO2MX-A-NC  for opticalCON DUO multi-mode cables
  • SCNO2SX-A-NC for opticalCON DUO single-mode cables
  • SCNO2SAX-A-NC for opticalCON DUO single-mode APC cables
  • SCNO4MX-A-NC for opticalCON QUAD multi-mode cables
  • SCNO4SX-A-NC for opticalCON QUAD single-mode cables
  • SCNO4SAX-A-NC for opticalCON QUAD single-mode APC cables
  • SCNO12MX-A-NC for opticalCON MTP® multi-mode cables
  • SCNO12SAX-A-NC for opticalCON MTP® single-mode APC cables
  • SCNO24MX-A-NC for opticalCON MTP®24 multi-mode cables
  • SCNO24SAX-A-NC for opticalCON MTP®24 single-mode APC cables

SCNO-FDW-A

SCNO-FDW-A

Rugged, all metal sealing cover for opticalCON chassis connector

Fiber applications as drop down or stage boxes and certain outdoor devices require an additional protection of theopticalCON chassis connectors. The sealing dust cover encloses the entire shutter group and completely protects the interiorfrom pollutant and ingress of water. It can be mated with thecable connector cover to keep the interior clean.