
For further enquiries, prices, samples and deliveries please contact our office on sales@4most.co.uk or +44 (0)1371 811171.
OUTDOOR ENCLOSURES SUMMARY
RAILWAY CABINET SUMMARY
Outdoor Modular Railway Cabinet
- Specifically certified for railway trackside applications
- Aluminum profile frame
- Removable, double-walled cladding
- Flexible in design and dimensions
- For high thermal management requirements
- All sides accessible
Modular HEX
- Double-walled, Al
- Aluminium profile frame with removable, double-walled cladding
- IP 55
- Forced heat dissipation via integrated heat exchanger in the door, max. 70 W/K
- Product family: Modular
- Degree of protection: IP 55 or NEMA 12
- Shielding: No
- Type: Aluminium, double wall
- Cooling: Air-to-air heat exchanger
Modular VENT
- Aluminium profile frame with removable, double-walled cladding
- IP 55
- Double-walled
- Product family: Modular
- Degree of protection: IP 55 or NEMA 12
- Shielding: No
- Type: Aluminium, double wall
- Cooling: Fan, ventilation
Outdoor Comline ECL
- Heat dissipation through natural convection
- Single wall, lightweight aluminium cabinet
- IP 55
- Product family: Comline ECL
- Degree of protection: IP 55 or NEMA 12
- Shielding: No
- Type: Aluminium, single wall
- Cooling: Natural convection
Outdoor Comline FTTX
- Single wall, lightweight aluminium cabinet
- Insulated cabinet
- IP 55
- Height dimensions without plinth (120 mm)
- Product family: Comline FTTX
- Degree of protection: IP 55 or NEMA 12
- Shielding: No
- Type: Aluminium, single wall
- Cooling: Insulation
Unibody
- Double-walled, Al
- IP 55
- One-piece inner case with removable outer cladding
- Heat dissipation through natural convection, max. 5 W/K (11249-003) / 6 W/K (11249-005)
- Product family: Unibody
- Degree of protection: IP 55 or NEMA 12
- Shielding: No
- Type: Aluminium, single wall
- Cooling: Natural convection
Unibody HEX
- Double-walled, Al
- Forced heat dissipation via integrated heat exchanger in the door, max. 70 W/K
- IP 55
- One-piece inner case with removable outer cladding
- Product family: Unibody
- Degree of protection: IP 55 or NEMA 12
- Shielding: No
- Type: Aluminium, single wall
- Cooling: Air-to-air heat exchanger
Unibody VENT
- Double-walled, Al
- Forced heat dissipation via fan assembled in side panel, max. 35 W/K
- IP 55
- One-piece inner case with removable outer cladding
- Product family: Unibody
- Degree of protection: IP 55 or NEMA 12
- Shielding: No
- Type: Aluminium, single wall
- Cooling: Fan, ventilation
Cable Entry for Comline ECL
- For cable ducting through the base of the cabinet
Distribution cabinet for fibre-optic cables
• Distribution cabinet for fibre-optic cables (FTTN/FTTH)
• Ex works with power supply, backup batteries and safety devices
• Design outdoor "Modular"
• Combined cooling with air conditioner and additional internal air circulation
Mounting Kit for Comline FTTX
• For fitting to depth member (25 mm grid)
• For recessed installation of 19"/23" components
• Slide rails can be fitted
• Load-carrying capacity 400 kg
Mounting Kit for Outdoor Comline ECL
• For fitting to depth member (25 mm grid)
• For recessed installation of 19"/23" components
• Slide rails can be fitted
• Load-carrying capacity 400 kg
Outdoor Accessories
- Metric Panels/Slide Mounts
- 19" Panels/Slide Mounts
Outdoor Service Plus - Mobile Telephony Power Supply
• Cabinet for power supply to mobile telephony base stations
• Based on the "modular" cabinet concept with a special top panel design for cabling; can accept both 19" and 21" wide devices
• Heat exchanger in the front door
• AC/DC power distribution installed laterally beside 19" plane
Outdoor Services Plus - Mobile Telephony Base Station
• Mobile telephony base station with energy supply in one cabinet
• BTS connection via special cable routing in top element
• Based on the "modular" concept, the cabinet can be upgraded with vari-ous pre-defined "kits"
• Cooling either via fresh-air inlet (air filtered fan) or, in other cabinet variants, using an air conditioner
Spools for Fibre Optic Cables
- Spools for Fibre Optic Cables, moulded with black plastic
VDSL distribution cabinet
• VDSL distribution cabinet
• Case based on a "modular" frame and double-walled outer cladding
• Cooling via controlled fans in case top panel. Airflow is only between the double walls; the device area remains sealed
• Separate stainless steel base with space for batteries and cable ducting
Wall Mounting Kit for Unibody
• Suitable for all Unibody standard dimensions
• Cut-out for cable ducting from the top
WIMAX applications base station
• Base station for Wimax applications
• "Unibody" concept with special base for easy assembly at installation site
• Fresh air inlet via air inlet filter
• Additional components such as cabinet heater and door contact switch factory pre-installed