Split frame, gland and grommet cable entry systems to provide a quick, neat, cost effective solution for cable entry into an enclosure without having to cut off and then re-wire pre-terminated connectors. Simply open the cable grommet, insert the cable and assemble into the frame or panel.

Environmentally approved to IP65, flame retardant to UL94-VO and strain relief to EN 62444. Cable diameters ranging from 1 to 35 mm can be accommodated into a frame system that fits into an industry standard 24 pin rectangular connector.

Many cables can be fitted into one cut out with frame extensions available for larger systems. For larger cables the KEL Jumbo frame can take cable diameters up to 65mm. NEMA, HL3 EN 45545-3 rail and EX ratings all available.

For further enquiries, prices, samples and deliveries please contact our office on sales@4most.co.uk or +44 (0)1371 811171.

KEL-ER-E2 cable entry frames

KEL-ER-E2 cable entry frames

  • Split cable entry system KEL-ER-E2 for routing and sealing up to 2 cables with connectors).
  • It is particularly suited for flat connectors.
  • The small frame is ideal for applications with limited space.
  • The cable entry system is easy to install.
  • Cable grommets are placed into compartments and are securely fixed to the frame during assembly.
  • A flat rubber gasket is included in the shipment.

  • Warranty on pre-terminated cables remains
  • Retrofits, repairs and maintenance can be done much more easily and quickly
  • Strain relief according to EN 62444
  • Space saving shape
  • Optimal for D-Sub connectors
  • High stability, vibration resistant

KEL Split cable entry frames

KEL Split cable entry frames

Cable diameters up to: 35mm

  • Split grommet and frame system to accommodate multiple cables of varying sizes
  • A rubber cable entry plate can be included to feed through non terminated cables
  • IP65 / IP54
  • Multi stack extender option 
  • Warranty on pre-terminated cables remains
  • Retrofits, repairs and maintenance can be done easily and quickly
  • High cable density, wide variety of grommets

KVT Split cable glands

KVT Split cable glands

Circular split frame for easy installation of cables with connec

  • M20 - M80, for cable diameters up to 35 mm
  • QUICK, M16 - M50, for cable diameters up to 15 mm
  • QUICK M25 - M40, for cable diameters up to 15 mm

KVT-ER Split cable glands

KVT-ER Split cable glands

Circular split frame for easy installation of cables with connec

  • M32, M50 & M63
  • QUICK, M16 - M50, for cable diameters up to 15 mm
  • QUICK M25 - M40, for cable diameters up to 15 mm

 KT Grommets and plugs

KT Grommets and plugs

Piece parts for Cable Entry Frames

  • Single and multi –cable split grommets to suite various cable sizes
  • Membrane cable grommets for connectors without pre- assembled connectors.
  • IP65 / IP54.
  • Assemble these grommets into a KEL frame.
  • Service Box with selection of grommets, plates and frames.

EMC-KT Cable grommets

EMC-KT Cable grommets

Piece parts for Cable Entry Frames

  • Contacting the cable shield over 360°
  • Grommets made entirely from conductive elastomer
  • Enable routing of pre-terminated cables through EMC cable entry frames
  • Available for a big range of cable diameters

KT-DT

KT-DT

Membrane Cable Grommets.

  • Combination of routing pre-terminated cables and cables without connectors with one cable entry frame
  • Enables sub-assembly of cable harnesses
  • High cable density

KT-M

KT-M

Grommet With etric inner thread

  • By using KT-M grommets, panel connectors and sockets can be integrated directly into the cable entry system
  • Separate cut-outs in the wall not necessary
  • Space-saving solution
  • Thread sizes M12 to M25 available

QVT-CLICK

QVT-CLICK

Split Pluggable Cable Glands.

  • Fast and easy mounting from the front side
  • Compact design
  • Routing of pre-terminated cables
  • Retrofits, repairs and maintenance can be done much more easily and quickly
  • Warranty on pre-terminated cables remains
  • Fast and easy assembly
  • For wall thickness 1.5 - 2.5 mm

KEL-FG Split flange enclosure

KEL-FG Split flange enclosure

Cable entry up to 35mm, 90 degree entry into Enclosure

  • Installations at 90 degrees to the wall/enclosure.
  • Uses same grommets as Open Frame Systems.
  • Protects cables at point of entry into cabinet.
  • IP54 rated, gasket supplied.

KEL-SNAP mounting frames

KEL-SNAP mounting frames

For installation of KEL-U / KEL frames

  • Fit this frame into the panel for quick installation and disassembly of standard systems.
  • IP54 rated with integral gasket.
  • Ideal for maintenance intensive applications.

KEL-FL Split cable entry frames for flat cables

KEL-FL Split cable entry frames for flat cables

Slotted Grommet version

  • Routing of flat cables of various dimensions to IP54
  • Can mix with split grommets for cables up to 16mm

KEL 183 Split cable entry frames

KEL 183 Split cable entry frames

Cable diameters up to 35mm

  • Centrally split version of the KEL allowing additional extender frames
  • IP65 / IP54
  • Multi stack extender option 
  • Warranty on pre-terminated cables remains
  • Retrofits, repairs and maintenance can be done easily and quickly
  • High cable density, wide variety of grommets

KEL Jumbo cable entry frames

KEL Jumbo cable entry frames

Cable diameters up to: 65mm

  • IP54 sealed entry for cables and conduit up to 65mm diameter
  • Flexible at the point of entry
  • Adaptor grommet for smaller cables.

KEL-BES Brush frames

KEL-BES Brush frames

For cable entry

  • For cable entry into Large Enclosures, Control Boxes and Network Cabinets.
  • Ideal for raised floor computer centre applications.
  • Allows reduced airflow whilst filtering out larger particles.

KEL Quick cable entry frames

KEL Quick cable entry frames

Snap Together Frame System

  • Snap in cover lid assembly
  • Compact frame in single or double row
  • Cut outs match 10, 16 and 24 pin rectangular industrial connectors
  • Flat rubber gasket included

QVT Split cable glands

QVT Split cable glands

Circular split entry system

  • Compact design for smaller cables
  • Aids routing of pre terminated cables
  • IP54 rated

KEL QTA / QTE Split cable entry plates

KEL QTA / QTE Split cable entry plates

  • A mix of rubber membrane plate for non- terminated cables and a split entry grommet for terminated cables.
  • No assembly tools required.

QT Quick grommets

QT Quick grommets

For cables w/o connectors,

  • IP54
  • Cable diameter range 3 - 15 mm

Fire penetration seals

Fire penetration seals

Railway Approved to EN 45545-3

  • IFPS gaskets for split frame systems in Railway applications
  • Expandable graphite material expands to block the aperture and contain the smoke
  • High classification E45/El30.