FCT Plastic Hoods
FKC Series
-
Hood serie with straight or right angled cable outlet, partly in shielded version (metallised), large inner chamber, suitable for D-Sub connectors with special contacts
FPHGR Series
-
Hood serie with flat hood body, alternatively straight or / and right angled cable outlet with cable clamp
FKH Straight Cable Outlet
- Easy assembly with snap-in system
- Straight cable outlet with strain relief
- Can be used in conjunction with locking,knurled thumb screws or lockings hook sizes 1 to 3
- Also available in shielded version (metallised)
- Modification (K189), to enable the use of slide locks, available
- Also available with rubber bushing FKT
- Hood shells in sizes 1 to 5 are supplied with indents for positioning when mounting hoods (Also available in other shell sizes on request)
FWA Waterproof
- Waterproof according to IP67 in combination with D-Sub connectors with modification no.
- K700 or -K701
- Large inner chamber
- Straight cable outlet with strain relief
- In metallised version with shielding plate
FWH Waterproof
- Simple sealing of non waterproof connections
- Waterproof according to IP67 when assembled
- Low hood body
- Complete set, including locking screws
- Captive locking screws
- Metallised version has EMI/EMC protection
- Disassembly with a screwdriver (no special tools required)
- Straight cable outlet with strain relief
- Hood shells are supplied with indents for positioning when mounting hoods
FKS Right Angled Cable Outlet
- Very low hood body 35 mm (1.378”)
- Large inner chamber
- Right angled cable outlet with strain relief
- Can be used in conjunction with locking or knurled thumb screws
- Also available in shielded version (metallised)
- Modification (K189), to enable the use of slide locks, available
- Also available with rubber bushing FKT
FPHF IDC-Connectors
- For flat cable
- Very low hood body
- Large inner chamber
- Straight cable outlet with strain relief
- Can be used in conjunction with locking and knurled thumb screws
- Cable outlet reduction by use of strain relief
FAH Adapter Hood
- Very large inner chamber
- Can be used as a hood or an adapter hood (D-Sub connectors can be inserted either side)
- Straight cable outlet
- Easy assembly with catch spring system and premounted locking screws
- Can be used with slide lock system (...K189)
- Can be used with locking hooks
F1069 Adapter Hood
- Very large inner chamber
- Can be used as a hood or an adapter hood (D-Sub connectors can be inserted either side)
- Straight cable outlet
- Shell size 1 + 3 also available in shielded (metallised) version
FKE
- Reliable Electro Static Discharge (ESD) protection
- Electromagnetic Compatibility (EMC) as a result of EMI/RFI shielding
- Snap latches to facilitate easy assembly
- Simple disassembly to facilitate easy servicing
- Complete kit incl. knurled thumb screws
- Captive knurled thumb screws
- Large inner chamber
FDH
- Low height for use with connectors which are very close together
- Component set incl. locking screws
- Captive locking screws
- Also available with metallized hood shells
- Straight and 60° cable outlets
- Hood shells snap together with or without shell screws
FBUSN Bus Hood
- Can be used as a node as well as a terminal version due to a switch
- Simplified cable assembly through the use of spring strain relief
- No loose individual and assembly parts
FKP Angled Cable Outlet
- Easy assembly with catch spring system and premounted locking screws
- Large inner chamber for PCB mounting
- Angled cable outlet with strain relief
- Can be used with slide lock system (...K189) and locking screws
- Also available with rubber bushing FKT