D-Sub High Density Connectors
Right angled adapter
This series is a very robust 90° adapter hood for narrow installation conditions. Both standard D-Sub- and High Density-connectors can be used. It is possible to make a contact transfer from pin device side to socket termination side and vice versa. The angle direction can be selected depending on the application.
- very good shielding properties
- very good electrical properties
- good possibilities for filtering
- May be used as a bracket adaptor, e.g. in narrow installation conditions
- Suitable for robust application
- Very good shielding properties
- No loose component or assembly parts, screws are pre-mounted
- A change in the termination direction is facilitated with "reverse”
mounted contacts
- Very good electrical properties through the use of one-piece contacts
High Density D-Sub
Due to the contacts' higher density of, this series is ideally suited for the most modern applications in data transmission and telecommunications, as well as in measurement, regulation and control devices. The tin plated shells also offer good shielding qualities and are mechanically stable. These connectors are available in straight and right angled versions for p. c. boards. They can also be supplied for cable assemblies in solder or crimp version. The heat resistant plastics used in the production of the connectors meet UL94V-0 requirements. The stamped crimp contacts are available in reels of 300, 2000 or 10000 pcs. They are selectively gold plated in the mating area. The turned crimp contacts are available in standard and MIL version.
For turned contacts min. retention force according MIL > 40 N
For stamped contacts min. retention force according DIN > 20 N
contacts
Accessories
With the help of mounting elements, accessories and complete mounting systems, which were developed by FCT, our customers are able to assemble connectors to devices, PCB’s and equipment optimal and easy under several conditions and requirements.
Due to proprietary development a high development status and the orientation on customer and practical needs can be guaranteed.
The following accessories are available:
- Spring locks
- Slide locks
- Screw locks
- Clinch nuts
- Accessories
- Spacers
- Snap-in bolts
- Screw locks
- Reduction plates
- Covers
- Latch locks for PCB mounting
- Plastic brackets
- Metal bracketstacts